Shop

Wheaton Arms Elite Pro-Carry Trigger Assembly, Red & Black Finish, Fits Glock 20, 21, 29, 30, 40, 41 Gen 1-4, MOS, S and SF

$129.99

Wheaton Arms Elite Pro-Carry Trigger Assembly, Red & Black Finish, Fits Glock 20, 21, 29, 30, 40, 41 Gen 1-4, MOS, S and SF

The Elite Pro-Carry Gen 1-4 Glock Trigger with trigger bar is one of the most important aftermarket parts you can install to improve the performance of the Glock pistol. No more spongy, mushy feeling trigger. No more plastic trigger to flex. No more plastic safety to wear out and potentially fail. No more long, annoying pre-travel before the shot breaks. The new Elite trigger has addressed all the issues and more.

Features:

Fits Glock Gen 1-4 Model 20, 21, 29, 30, 40, 41 Gen 1-4, MOS, S and SF

All Elite triggers are manufactured with 7075 aluminum for strength, durability & wear resistance

Type 3 hardcoat anodized Red & Black finish for superior wear & durability

The trigger & safety are wider than the stock trigger for a more positive feel

All edges are beveled to prevent trigger bite

Trigger safety does not dig into your finger like the stock plastic safety and many aftermarket triggers

Prepped & polished trigger bar reduces friction

Flat face trigger & safety for improved performance and feel

Pre-travel stop machined into the trigger (nothing to adjust)

Trigger pre-travel reduced compared to a stock trigger

Competent gunsmith installation recommended

User assumes all liability for correct function and safe installation

Out of stock

Description

Wheaton Arms Elite Pro-Carry Trigger Assembly, Red & Black Finish, Fits Glock 20, 21, 29, 30, 40, 41 Gen 1-4, MOS, S and SF

The Elite Pro-Carry Gen 1-4 Glock Trigger with trigger bar is one of the most important aftermarket parts you can install to improve the performance of the Glock pistol. No more spongy, mushy feeling trigger. No more plastic trigger to flex. No more plastic safety to wear out and potentially fail. No more long, annoying pre-travel before the shot breaks. The new Elite trigger has addressed all the issues and more.

Features:

Fits Glock Gen 1-4 Model 20, 21, 29, 30, 40, 41 Gen 1-4, MOS, S and SF

All Elite triggers are manufactured with 7075 aluminum for strength, durability & wear resistance

Type 3 hardcoat anodized Red & Black finish for superior wear & durability

The trigger & safety are wider than the stock trigger for a more positive feel

All edges are beveled to prevent trigger bite

Trigger safety does not dig into your finger like the stock plastic safety and many aftermarket triggers

Prepped & polished trigger bar reduces friction

Flat face trigger & safety for improved performance and feel

Pre-travel stop machined into the trigger (nothing to adjust)

Trigger pre-travel reduced compared to a stock trigger

Competent gunsmith installation recommended

User assumes all liability for correct function and safe installation

Additional Information
Weight 4 oz
Q & A (1)

Q & A

Ask a question
How many pounds does the trigger break at? And is there a defined wall? Thomas C asked on August 31, 2024

The trigger pull weight, break & wall is controlled by the connector and springs. If you want a wall, you increase tension on the connector. If you want a rolling break you decrease tension on the connector. The trigger assembly above will break within a 1/4lb of your factory trigger. The difference will be a much smoother pull with no flexing of the trigger shoe and a shorter reset. If you want to lower the trigger pull weight, I would recommend the trigger pull kit #1. This kit will give you a 3.5 to 4lb pull with a wall and short reset.
https://wheatonarms.com/product/wa-trgr-pull-kit-1-fits-glock/

Wheaton Arms answered on October 7, 2024 store manager
(0) (0)
Add an answer